 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Specification Type : Parameter Issue: 03 AXGAP52F GaPO4 - Crystal Resonator Unit Date: 2005-07-15 min. typ. max. Unit 5 20 MHz MHz Y-16 1 See ordering code -10 +10 Condition Frequency range Actual frequency Crystal cut Overtone Load capacitance CL Adjustment tolerance Frequency offset Frequency stability vs. temperature in operating temperature range (steady state) long term (aging) Resonance resistance Rr Motional capacitance C1 Shunt capacitance C0 Drive level Drive level dependence (DLD) Unwanted responses Insulation resistance Operating temperature range Operable temperature range Storage temperature range Enclosure (see drawing) Can height SMD configuration marking -20 -10 40 100 2*Rr 500 -10 -40 -55 20 +60 5 15 150 7 pF ppm ppm ppm ppm C ppm fF pF W 30 pF if not specified @ 25C, ref. to offset Overall (Note 1) See chart page 2 per year @ +55C Increasing with frequency IEC 60444-6 M +60 C +85 C +125 C mm Side 1 100 V DC (Note 2) IEC 60286-3 Packing Notes: 1. Overall frequency stability = initial tolerance + temp. stability + aging (1st year) 2. Date Code format wwAXyy 3. Terminology and test conditions are according to IEC standard IEC60122-1, unless otherwise stated 4. Measurement technique according to IEC 60444-5 or equivalent HC-52/U 8.8 max. on request Frequency (MHz) Spec Date Code bulk IEC 60122-3 or 61837 Ordering Code: Model (Specification) AXGAP52F Load capacitance* Frequency [pF] [MHz] 20 7,030 *Series resonance: "S" GmbH & Co. KG Wasemweg 5 D-74821 Mosbach Germany AXGAP52F page 1(2) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: info@axtal.com Enclosure drawing (in mm) Environmental conditions Test Visual inspection, dimensions Sealing tests Solderability Resistance to soldering heat Shock Bump Free fall Vibration, sinusoidal Rapid change of temperature Dry heat IEC 60068 Part ... IEC 61178-1 clause ... 4.5 4.6 4.8.2 4.8.3 Test conditions Enclosure styles as in IEC 60122-3, if applicable Gross leak: Test Qc, Fine leak: Test Qk Test Ta (235 5)C Method 1 Test Tb Method 1A, 5s Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Eb, 4000 bumps per Axes, 40g, 6 ms Test Ed procedure 1, 2 drops from 1m height Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Test Na, 10 cycles at extremes of operating temperature range Test Ba, 16 h at upper temperature indicated by climatic category Test Db variant 1 severity b), 55C/95% r.H., 6 cycles Test Aa, 2 h at lower temperature indicated by climatic category Sequence of 4.8.11, 4.8.12 st (1 cycle), 4.8.13, 4.8.12 (5 cycles) Test Ca, 56 days 2-17 2-20 2-27 2-29 2-32 2-6 4.8.8 4.8.6 4.8.9 4.8.7 2-14 4.8.5 2-2 4.8.11 Damp heat, cyclic Cold 2-30 2-1 4.8.12 4.8.13 Climatic sequence 1-7 4.8.14 Damp heat, steady state Endurance tests - ageing - extended aging 2-3 4.8.15 4.9.1 4.9.2 30 days @ 85C 1000h, 2000h, 8000h @85C GmbH & Co. KG Wasemweg 5 D-74821 Mosbach Germany AXGAP52F page 2(2) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: info@axtal.com |
Price & Availability of AXGAP52F
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |